Service Telephone£º021-64820099 24-Hour Service Hotline£º15900706965 Mail:info@jichuan.sh.cn
 Meguin
   
 
Meguin
 
 
 

 

 

 

 

Your present location:HomePage-Products Centre--Meguin
 
 

Megol Hochtemperaturfett PH KEP2R-20

megol high temperature grease PH KEP2R-20 is a high performance grease-high temperature grease
based on high temperature-resistant mineral oils and synthetic ester in combination with an organic
thickener. The special lead- and chlorine-free additives along with the synthetic base oil components
give it outstanding thermal stability and excellent lubricating properties over a wide temperature range.
It is resistant to cold and hot water, it greatly reduces friction with effective corrosion protection and
provides optimal protection against wear.
megol high temperature grease PH KEP2R-20 is particularly suited for long-term lubrication with low
and high temperatures of high load plain and roller bearings, rub blocks, hinges, guide rails etc.
The instructions of the bearing manufacturers are to be followed. Do not mix with other grease
products.
Application temperature range -20¡ãC to +180¡ãC
Temperature peaks of up to +210¡ãC are possible temporarily.

Characteristic data

¡¡

¡¡

approx. values

Appearance and properties

¡¡

¡¡

natural coloured, smooth, supple

Thickener

¡¡

¡¡

polycarbamide

Base oil

¡¡

¡¡

ester and mineral oil

Base oil

¡¡

¡¡

¡¡

Viscosity at 40¡ãC

DIN51562

mm2/s

350

Drip point

DIN ISO2176

¡æ

260

Consistency class

DIN51818

¡¡

2

Fulling penetration

DIN ISO 2137

0.1mm

280-305

Fulling stability

DIN ISO 2137

¡¡

¡¡

Difference after 5,000 and 60 double strokes

¡¡

0.1mm

<10

Difference after 10,000 and 60 double strokes

¡¡

0.1mm

<10

Properties in water

DIN51807 part 1

¡¡

1-90

Anti-corrosive properties

¡¡

¡¡

¡¡

Emcor method

DIN51802

degree of corrosion

0/0

Copper strip test

DIN51811

degree of corrosion

1-125

Water content

DIN ISO3733

g /kg

<0.1

Oil separation after 7 days

¡¡

¡¡

¡¡

and +40¡ãC

DIN51817

g /100g

<1.5

Four Ball Tester welding force

DIN51350 part 4

N

2600/2800

Flow pressure at -30¡ãC

DIN51805

mbar

1200

 
 
   
Copyright © 2001-2010 All Rights Reserved ShangHai PingYiao Trading Co.,Ltd
TEL:(86)21 6482 0099¡¡FAX:(86)21 6451 3829 Service Hotline£º15900706965£¨24-hour£©Mail:info@jichuan.sh.cn